Norcal Jeepers

Please login or register.

Login with username, password and session length
Advanced search  

News:

Tapatalk is still having problems starting new threads, but you can still reply to old threads

Welcome to Norcal Jeepers!
Welcome to Norcal Jeepers! It looks like you're not registered yet. As a guest you are missing out on a bunch of great content that is only viewable once you register. To register, simply follow the link below and fill out some information about yourself. It only takes a few minutes!

Click here to register now!

Author Topic: d-30 axles  (Read 1042 times)

chuck

  • Offline Offline
  • Posts: 51
  • Location: sacramento
d-30 axles
« on: June 18, 2014, 10:23:01 PM »
d-30 2001 wrangler 1 piece axles just above Chico on c l w/ large u joints. I wonder if these would fit and be a good upgrade for my 94 yj? $120.00
Logged

Day215

  • Offline Offline
  • Posts: 2188
  • Location: Rocklin
Re: d-30 axles
« Reply #1 on: June 18, 2014, 10:55:38 PM »
Yes they will fit, yes they would be a good upgrade. Im going to assume you still have the two piece shafts? You'll need to replace the seal at the CAD with a new seal at the diff, not hard to do.

You can also pull shafts from an XJ at pick and pull for the same price, for the cost of gas driving to chico, that might be the way to go. If you do XJ shafts, you'll want to measure the ujoint caps to be sure your getting the larger joint. I would also suggest modding the shafts to accept full circle clips.
Logged
92’ Toyota minitruck Front Dana 60 4.88’s, Lincoln locked, drive slugs blah blah blah. Rear Dana 70 4.88’s, Lincoln locked, 63” chevys. W56 5speed, 2.28 duals, 22re. 39.5’s and other stuff. Bobbed, exo’d, cut up etc. I used to wheel a YJ, then I defected. Now no one talks to me anymore.....can’t completly blame that on the switch though.

Quote from: pdangerp on May 16, 2013, 12:08:18 AM
I'm out of the club. Stay away from my wiener.