Topic: Coilovers (Read 2497 times)

Skorch · « **on:** December 05, 2015, 07:53:09 PM »

Been getting my ass beat packaging this but passenger side is finally completed with bumps and limit strap installed. Had to re plumb the trans cooler and move a bunch of stuff. Mark.

connor0770 · « **Reply #1 on:** December 05, 2015, 07:53:51 PM »

Where did you buy your bumps?

Skorch · « **Reply #2 on:** December 05, 2015, 08:37:04 PM »

Poly performance, I used a 20% discount I had from them. I have 2.5's for the rear that I bought on ebay for cheap, also Fox. Mark

4.3LXJ · « **Reply #3 on:** December 06, 2015, 03:02:36 PM »

That is looking real nice

Skorch · « **Reply #4 on:** December 06, 2015, 03:45:10 PM »

Thank you, got the drivers side stripped down.

connor0770 · « **Reply #5 on:** December 06, 2015, 06:17:35 PM »

I was going to get the kit from poly performance

Skorch · « **Reply #6 on:** December 06, 2015, 07:02:41 PM »

Orw advertises on ebay. Fox 2 bumps 2 cans any length 399. Free shipping. I basically asked Poly to do the same. Mark

connor0770 · « **Reply #7 on:** December 07, 2015, 11:12:45 PM »

Good idea. I'll see if they will match the price. What length did you go with? I'm thinking 3"

Skorch · « **Reply #8 on:** December 08, 2015, 05:27:11 AM »

2.5, I read till my eyes hurt. In the end I talked with Logan at Poly and he made some suggestions. My rig is 5 up 9 down on the shock. Mark

connor0770 · « **Reply #9 on:** December 08, 2015, 08:35:31 AM »

I'm the same stroke. Do you hit bump at 2.5 or 2"

Skorch · « **Reply #10 on:** December 08, 2015, 11:16:40 AM »

Bumpstops should bottom (if they ever do) with 1/2 inch of shaft showing on shock. Mark

connor0770 · « **Reply #11 on:** December 10, 2015, 08:29:57 PM »

10-4, that's what I thought.

Tru_Fab_Built · « **Reply #12 on:** December 24, 2015, 05:20:09 PM »

Connor how close are you?

Sent from my SM-G920V using Tapatalk

Skorch · « **Reply #13 on:** December 24, 2015, 10:44:41 PM »

Update a little, drivers side done. Built cross tube. Need to assemble this weekend. Mark.

Skorch · « **Reply #14 on:** January 02, 2016, 08:32:05 AM »

Pretty much done, have to mount the left rear shock and drive it. Mark.

Mr.B · « **Reply #15 on:** January 02, 2016, 09:03:27 AM »

Those are looking really good.

That level looks just like the one I use to hold up the hood on my Camry. I guess I will eventually have to buy new gas springs for it. But today I have to go buy a new battery for it.

Maybe its just me. But when I look at pics 1 and 2, while scrolling up on my monitor, the treads on your tires look inverted. The optical illusion isn't as bad when scrolling down.

Skorch · « **Reply #16 on:** January 02, 2016, 10:41:36 AM »

I can now install my prop rod as the cross over tube is done. And your right about the tire picture, had to look twice. Mark

Skorch · « **Reply #17 on:** January 03, 2016, 06:55:26 AM »

Drove it around. Mark

timatoe · « **Reply #18 on:** January 03, 2016, 12:54:30 PM »

Awesome!!

Tru_Fab_Built · « **Reply #19 on:** January 03, 2016, 07:27:05 PM »

Quote from: Skorch on December 24, 2015, 10:44:41 PM

Update a little, drivers side done. Built cross tube. Need to assemble this weekend. Mark.

This looks like a lot of work but man does all that work good. Nice build.

Sent from my SM-G920V using Tapatalk

News:

Author Topic: Coilovers (Read 2497 times)